BMW Tire Dealers
DOT Tire Identification Number
Federal law requires tire manufacturers to provide standardized information permanently branded on the sidewalls of all tires sold in the United States. This includes information about the tire�s basic characteristics, capacities and construction, as well as its U.S. Department of Transportation (DOT) Tire Identification Number used for safety standard certification and in case of a recall.
Current regulations require that Tire Identification Numbers begin with the letters "DOT," followed by ten, eleven or twelve characters (see photo below) that can be used to identify the manufacturing location, tire size and manufacturer's specifications, along with the week and year the tire was manufactured. So while DOT Tire identification Numbers are commonly but erroneously referred to as the tire�s serial number, unlike the serial numbers used on most other consumer goods that identify one specific item, Tire Identification Numbers actually identify production batches.
Regulations also require the entire DOT Tire Identification Number to be branded on one sidewall while only the letters "DOT" and the first digits of the Tire Identification Number must be branded onto the opposite sidewall (shown below). Therefore it is possible to see a Tire Identification Number that appears incomplete, yet simply requires looking at the tire�s other sidewall to find the complete Tire Identification Number.
Because not all tires are intended to be imported and sold in the United States, many tires are developed and produced without being tested by their manufacturer to confirm they meet all U.S. Federal Motor Vehicle Safety Standards (FMVSS). Without conducting the tests and certifying these tires meet U.S. requirements, these tires are not allowed to be branded �DOT� (shown below) and cannot be legally driven in the United States.